【Product Name】：ZP19D Rotary type tablet press

ZP19D rotary tablet press machine is a single automatic rotation of my latest developed from continuous tableting machine, it will granular materials into a variety of general and special-shaped pieces, mainly used in pharmaceutical industry , also apply chemical, food, electronics, plastics, powder metallurgy industries. The external casing is fully enclosed, made of stainless steel, in line with GMP standards. Fitted with transparent glass observation window, can clearly see the work of the machine and can fully open, easy to clean and maintain. This machine has a pressure, pressure piece by range, can suppress a variety of shapes ordinary tablets, shaped, circular, etc., especially for more variety, small batch production. Mechatronics, all the controller and devices focused on the body side, easy to operate. Equipped with a pressure overload protection device to prevent damage to the machine. Using oil lubrication of the transmission mechanism enclosed in the bottom of the body, extending the life of avoiding cross-contamination.

Die number	19 pay
Maximum tablet pressure	80 kN
Maximum tablet diameter	20 mm
The maximum depth of filling	15 mm
Maximum tablet thickness	6 mm
Wheel speed	37 rev/min
The maximum production capacity	45000/time
Motor	2.2 kilowatts 940 rev/min 380/50 volts/hertz
Dimensions	615×890×1680 mm
Weight	1000 kg

Applicable industries:

1, the pharmaceutical industry: Herbal tablets, medicine tablet, nutrient tablets, veterinary medicine, etc.

2, the food industry: candy pieces, coffee tablets, lozenges, chocolate beans, seasonings block, etc.

3, the health care industry: buccal tablets, milk tablets, calcium tablets, propolis tablets

4, electronic battery industry: electronic components, such as button batteries

5, the chemical industry: mothballs, aromatic balls, fertilizer tablets, mosquito coils, catalyst, disinfection tablets, powder, etc.

6, metallurgical ceramics industry: Catalyst, grain powder metallurgy, ceramics grain, metal sheets, etc.

The working process of the tableting machine can be divided into the following steps:

A lower punch punch site(its working position upwards) Central die hole extends into the lower end of the die hole, seal the bottom of the hole in the mold;

2, the use of the feeder to the drug filling the die orifice;

3, on the red punch site(its working position down) since the fall of the upper mold die hole hole, and certain travel downstream, the powder into tablets;

4, on the red ascend out of the hole. Undershoot rise to the top of the tablet in the die hole, to complete a tabletting process;

5, rushed down to the next place, ready for the next one to fill.

Tablet tablets mechanism works:

1. Dose control

There are a variety of tablets of different dosage requirements, high dose adjustment is accomplished by selecting a different diameter of the punch die to achieve. After choosing the size of the die, the tiny dose adjusted by adjusting the depth of the lower punch inserted into the die hole, so as to alter the actual length of the back after the die orifice, to adjust the filling volume of the die hole the purpose of the drug. Therefore, on a tablet machine should have adjusted undershoot in the mold of the original location of the hole institutions to meet dose adjustment requirements.

2. Thickness and compaction control pills

Dose is determined according to the pharmacopoeia of prescription and can not be changed. For storage, preservation and disintegration time requirements, tableting pressure on certain dose is required, and it will also affect the actual thickness and appearance of the tablets. Tableting pressure regulation is essential. This is accomplished by adjusting the hole punch in the mold to achieve the amount of downlink. Some tablet tableting machine with a punch not only during downward movement, but may also have a lower punch upward movement, by the upper and lower punch relative movement together to complete the compression process. But more than that to achieve a pressure regulator pressure regulator and control impulse downward adjustment amount by the institution.