【Product Name】：ZP35D rotary type tablet press pharmaceutical tablet press

[Purpose Description]

1, the machine is an automatic rotation, frequency control, continuous tableting machine. It is mainly used in the manufacture of tablets in the pharmaceutical industry, while the granular material in the chemical, food, electronics and other industrial sectors suitable for compressed into tablets.

2, the machine is suitable for pressing powder containing volume(more than 100 mesh) does not exceed 10% of the particulate material. This machine does not apply to semi-solid, moist granules, low melting point, easy tide of raw materials and grain-free powder compaction.

Turntable die number	35 pay
Maximum working pressure	100 kN
Maximum tablet diameter	22 mm
The maximum depth of filling	15 mm
The maximum sheet thickness	6 mm
Production capacity	6-12 million/hour
The die diameter	26 mm
Upper and lower punch diameter	22 mm
Working diameter turntable	420 mm
Upper and lower punch length	115 mm
Host motor skill	4 kilowatts
Host NW	1800 kg
Host(L×W×H)	980×1240×1690 毫米

[Structure, principle]

1, the structure and performance characteristics

2, the use of variable frequency motor speed to be, driven by the timing belt pulleys worm gear so that the turntable is rotated. Turntable rotating clockwise drive 35 pair dies operation. Each pair dies by the upper and lower rails and pressure roller other institutions feeding, filling, tabletting and a film such as tabletting process.

3, the pressure of the machine, filling, slice thickness and speed can be adjusted, and all are in the hand wheel adjustment front of the machine, and the operator panel instructions. Simple operation, easy maintenance.

4, the drive mechanism and the suppression chamber ZP35D tablet machine is completely isolated, in order to ensure compliance with GMP requirements tablet. In the tablet pressing chamber are made of non-toxic, non-corrosion stainless steel plate will be isolated from the rest of it. Four weeks are sealing device to prevent cross contamination of produce with the outside world.

5, the pressure wheel unloading device is provided, the pressure can be adjusted when the operating pressure exceeds the pressure punch pre-set, the compression spring to unloading by a buzzer sound and light signals, the machine instantly stopped, to prevent mechanical damage.

6, the machine uses a closed immersion oil lubricated worm gear, worm gear to extend the service life.

7, on the rails of the machine, the worm drive, hopper, feeder, rail and other parts are filled with generic tablet press ZP33 type. Die of the machine meet the standards "JB20022-2004", and with the ZP33,19 common type tablet press.

8, both sides of the plate and the rear side of the machine can be opened with a special key, the machine repair and maintenance more convenient.

Applicable industries:

1, the pharmaceutical industry: Herbal tablets, medicine tablet, nutrient tablets, veterinary medicine, etc.

2, the food industry: candy pieces, coffee tablets, lozenges, chocolate beans, seasonings block, etc.

3, the health care industry: buccal tablets, milk tablets, calcium tablets, propolis tablets

4, electronic battery industry: electronic components, such as button batteries

5, the chemical industry: mothballs, aromatic balls, fertilizer tablets, mosquito coils, catalyst, disinfection tablets, powder, etc.

6, metallurgical ceramics industry: Catalyst, grain powder metallurgy, ceramics grain, metal sheets, etc.

The working process of the tableting machine can be divided into the following steps:

A lower punch punch site(its working position upwards) Central die hole extends into the lower end of the die hole, seal the bottom of the hole in the mold;

2, the use of the feeder to the drug filling the die orifice;

3, on the red punch site(its working position down) since the fall of the upper mold die hole hole, and certain travel downstream, the powder into tablets;

4, on the red ascend out of the hole. Undershoot rise to the top of the tablet in the die hole, to complete a tabletting process;

5, rushed down to the next place, ready for the next one to fill.

Tablet tablets mechanism works:

1. Dose control

There are a variety of tablets of different dosage requirements, high dose adjustment is accomplished by selecting a different diameter of the punch die to achieve. After choosing the size of the die, the tiny dose adjusted by adjusting the depth of the lower punch inserted into the die hole, so as to alter the actual length of the back after the die orifice, to adjust the filling volume of the die hole the purpose of the drug. Therefore, on a tablet machine should have adjusted undershoot in the mold of the original location of the hole institutions to meet dose adjustment requirements.

2. Thickness and compaction control pills

Dose is determined according to the pharmacopoeia of prescription and can not be changed. For storage, preservation and disintegration time requirements, tableting pressure on certain dose is required, and it will also affect the actual thickness and appearance of the tablets. Tableting pressure regulation is essential. This is accomplished by adjusting the hole punch in the mold to achieve the amount of downlink. Some tablet tableting machine with a punch not only during downward movement, but may also have a lower punch upward movement, by the upper and lower punch relative movement together to complete the compression process. But more than that to achieve a pressure regulator pressure regulator and control impulse downward adjustment amount by the institution.

<img data-cke-saved-src="http://i05.c.aliimg.com/img/ibank/2014/524/337/1494733425_759668803.jpg" src="http://i05.c.aliimg.com/img/ibank/2014/524/337/1494733425_759668803.jpg" "="">